 Recently Veiwed Hitachi Guarantee
Hitachi is offering an exclusive 5-year limited warranty on select power tools. The warranty is valid only for the original purchaser of the Hitachi product. The 5-year warranty covers all Hitachi electric tools, excluding grinders, hammers, and compressors, which are warranted to the original purchaser for 1 year, and batteries, O-rings, and driver blades, which are warranted for 90 days. | | Home Hitachi NT65M2 16 Gauge 1-Inch to 2-1/2-Inch Finish Nailer | |
|  | |  | | | Hitachi NT65M2 16 Gauge 1-Inch to 2-1/2-Inch Finish Nailer | | | | | | | |
List Price:
| $338.10 | |
Our Price:
| $134.99 | |
You Save:
| $203.11 (60%)
| | *Shipping: | $7.00 | |
*Shipping:
| |
| | | SKU:
NT65M2 RECON | | In Stock | | Availability:
Usually ships in 1-2 business days | | |
|
| | Features | 16-gauge finish nailer with selective actuation for sequential or bump firing360 degree adjustable exhaust directs air away from the userTool free depth of drive; easy clear nose; elastomer gripIncludes tool fitting, safety glasses, no-mar tip, hex bar wrench, and caseWeighs 3.7 pounds; 5-year manufacturer's warranty
| |
| | Description | Hitachi NT65M2 2-1/2" 16-Gauge Finish Nailer with Integrated Air Duster Technology is the common thread behind the Hitachi brand. It's what makes Hitachi products superior in design and durability. From its birth, Hitachi has pioneered innovative technologies that have improved lives around the world. This knowledge is shared across all Hitachi divisions worldwide and is incorporated into applications that benefit many different products. Hitachi NT65M2 2-1/2" 16-Gauge Finish Nailer with Integrated Air Duster Features: Integrated air duster button allows air from the compressor to bypass the nailing function and expel from a hole in the front of the tool allowing the user to clear away dust and debris from the work surface in preparation for the nail Tool-less, easy-to-clear nose for quick and simple nail extraction should a nail jam during use Simple flip of the selective actuation switch allows for either sequential or contact fastening, depending upon the application, with no additional parts or tools required Tool-less depth of drive dial adjusts for flush fastening into varying material for improved control and a professional finish 360 degree, fully adjustable exhaust port directs air exhaust away from the user during use 3.7 lbs, lightweight and well-balanced for minimal fatigue and increased maneuverability No-mar tip protects the work surface from damage Elastomer grip adds comfort and a secure hold Accepts 1" to 2-1/2", 16-gauge fasteners Includes: Safety Glasses Tool Fitting No Mar Tip Case | |
| | Product Details | | Product Length: | 11.63 inches | | Product Width: | 2.8 inches | | Product Height: | 11.22 inches | | Product Weight: | 0.0 pounds | | Package Length: | 15.3 inches | | Package Width: | 14.0 inches | | Package Height: | 4.8 inches | | Package Weight: | 7.45 pounds | | Average Customer Rating: |  based on 14 reviews |
| |
| | Customer Reviews | Average Customer Review: ( 14 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
11 of 11 found the following review helpful:
 My best nailer Jan 29, 2007
By Edward Scott
"ewscott"
I have used this gun now to do quite a bit of siding, using wood siding and fiber cement trim. I have fired short finish nails and longer 2 1/2 inch nails (capacity). It has never, never jammed and never failed to fire if I remembered to turn on the compressor and to load in nails! There have been times that I drove a longer nail from one corner trim piece of fiber cement 1 X 6 into another and it didn't sink all the way, but it was silly of me not to change to shorter nails, so I don't blame the poor gun!
It's pretty, so you'll be tempted to treat it gently, but that isn't needed... it's a toughy!
6 of 7 found the following review helpful:
NT65 M2 Straight Nailer Aug 20, 2006
By Les Bramley
"Furniture maker"
This gun works well as a replacement for my old 16 gauge Hitachi gun, which is 10 years old and still works but jams too often .This version has a quick release so jams are easier to clear now hope it lasts as long.
3 of 3 found the following review helpful:
The best finisher I have ever owned Nov 16, 2008
By Miles
Lightweight and I haven't had a jam in over 3 cases of nails hanging beaded pine ceiling. I read a review when I purchased the gun that said "The gun feels like an extension of your hand." They were right.The air blowing feature seems a bit pointless, but it doesn't affect anything.
5 of 6 found the following review helpful:
great nailer, but pricey Mar 08, 2009
By Austin Shoemaker
Pros:
-exhaust can be rotated (air in the face is annoying and dangerous)
-button to spray air (very handy for bleeding compressors at the end of the day)
-great weight and balance, extremely comfortable
-jam clearing mechanism is super easy to use (haven't had a jam yet though)
-very consistent depth of drive
-comes with air fitting pre-installed (no need to buy)
Cons:
-don't like the tip style as much as my other nailers
-no lockout mechanism to prevent dry fire
It's worked well for me on furniture projects, and I don't have any major complaints. It's a great nailer (maybe even the cadillac), but I probably wouldn't recommend it to any of my amateur woodworker friends, because they can get something else to do the job at a fraction of the cost (lots of good nailers on the market right now).
Five stars for quality and design, but only three stars for value. In the end, it's still a five star tool.
2 of 2 found the following review helpful:
Outstanding value and a pleasure to use Sep 12, 2010
By J. Craig Walker
I'm building a log home and bought this nail gun to install the tongue and grove ceilings. I've used over 4,000 nails so far and have had absolutely no failures. It is light enough to operate overhead all day and at 80 psi will seat a 2" nail under the wood's surface. It fits the hand well and is fully adjustable without tools. The only negative I can find is that it has no way to hang it up while fitting a board. I use it with a small 2.5 HP, 4.2 CFM compressor and it will shoot 12 nails before cycling the unit. The nails are easily available on-line or at your local big-box store and this gun is not fussy about what brand you feed it. I liked it so well that I went back and bought it's big brother, the Hitachi framing nailer (but that is another review).
See all 14 customer reviews on Amazon.com
| |
* Estimated shipping rate for US 48 states. Final rate calculated at checkout. | |
| |  | |  |
|
Best Sellers | You may also like ... |
