• 5/8-Inch to 1-1/4-Inch 18-gauge brad nailer with reload indicator alerts the user when nail quantities are low so blank drives are avoided

• Selective actuation switch lets the user easily select bump fire or sequential fire modes; tool-less, easy-to-clear nose; depth of drive for a professional finish

• Lightweight aluminum body and composite magazine provide for a tool that reduces user fatigue; no-mar tip on the nose protects the work piece from markings

• Includes safety glasses, air fitting, hex bar wrenches, case, no-mar tip

• 10 by 7.25-Inch (LxH); 2.0-Pound; 5-year warranty

Hitachi 8217;s 18-gauge nailer is the ideal finish nailer for trim work, furniture and other finish applications. The NT32AE2 accepts 5/8-Inch to 1-1/4-Inch 18-gauge fasteners. The new selective actuation switch lets the user easily select bump fire actuation for quick brad nailing when precise placement is not required. By simply flipping the switch, the user transitions to sequential fire for specific nail placement. At only 2.0 Pound, it is well-balanced and lightweight to make finish work a breeze. The elastomer grip adds comfort while preventing slippage. The visual nail reload indicator located on the magazine alerts the user when nail quantities are low so that blank drives are avoided. It features a tool-less, easy-to-clear nose for quick and simple nail extraction should a nail jam during use. The NT32AE2 has been engineered with the safety behind the narrow nosepiece and a short center height to allow for nail placement in hard to reach areas and into tight corners. A simple turn of the depth of drive dial allows the user to easily adjust the drive depth, accommodating woods of varying density for a professional finish every time. The new no-mar tip on the nose protects the work piece from markings. An easy to use 360-Degree adjustable exhaust port keeps dust, debris and oil off the finish project. The signature 8220;inspire 8221; appearance of the new finish nailer reflects the ergonomic design being implemented by Hitachi Power Tools since 2004. These new ergonomic considerations improve the feel and comfort when handling the tool for lengths of time, not only reducing user fatigue and repetitive stress injuries but also providing more control during use. Even the factory installed air fittings are now angled upwards to conform to the way a wrist naturally holds the tool keeping the hose conveniently and comfortably placed during use. Combined with Hitachi 8217;s 5-year warranty, this brad nailer is guaranteed to deliver for years to come.