| |
Shop
| |  |
|
Recently Veiwed Hitachi Guarantee
Hitachi is offering an exclusive 5-year limited warranty on select power tools. The warranty is valid only for the original purchaser of the Hitachi product. The 5-year warranty covers all Hitachi electric tools, excluding grinders, hammers, and compressors, which are warranted to the original purchaser for 1 year, and batteries, O-rings, and driver blades, which are warranted for 90 days. | | Home Hitachi C8FSHE 8-1/2-Inch Sliding Compound Miter Saw with Laser Marker | |
|  | |  | | | Hitachi C8FSHE 8-1/2-Inch Sliding Compound Miter Saw with Laser Marker | | | | | | | |
List Price:
| $690.00 | |
Our Price:
| $315.50 | |
You Save:
| $374.50 (54%)
| | Shipping: | This item ships for FREE with Super Saver Shipping. | |
*Shipping:
| |
| | | SKU:
| | In Stock | | Availability:
Usually ships in 1 business days | | Only 4 left in stock, order soon! | | |
|
| | Features | Hitachi's exclusive Laser Marker System for exact alignment and predictable blade placementFully adjustable LED work light illuminates the table from any angle for bright visibility.Powerful 9.5amp motor with a no-load speed of 5500 RPM to smoothly handle the toughest jobsPositive stops on miter and bevel scales for easy-to-read measurementsVertical handle with soft, vibration reducing elastomer grip
| |
| | Description | Hitachi C8FSHE 8-1/2" Sliding Compound Miter Saw with Laser MarkerTechnology is the common thread behind the Hitachi brand. It's what makes Hitachi products superior in design and durability. From its birth, Hitachi has pioneered innovative technologies that have improved lives around the world. This knowledge is shared across all Hitachi divisions worldwide and is incorporated into applications that benefit many different products.Hitachi C8FSHE 8-1/2" Sliding Compound Miter Saw with Laser Marker Features:; Hitachi's exclusive Laser Marker System for exact alignment and predictable blade placement ; Fully adjustable LED work light illuminates the table from any angle for bright visibility ; Positive miter stops for quick adjustments to 15;, 22.5;, 31.6;, and 45; to the left and right. ; Precise compound cuts with 48; bevel angle left and 5; bevel angle right ; Only 32lbs for lightweight portability ; Powered by a 9.2 Amp motor with a no-load speed of 5,500 RPM to smoothly handle the toughest cutting applications ; Sturdy construction stands up to jobsite travel and tough high-volume tasks while retaining accurate measurements ; Easy-to-read measurements and quick settings on miter and bevel scales ; Linear ball bearing slide system for superior accuracy and ease ; Vertical handle with soft, vibration reducing elastomer grip ; Electronic speed control for consistent RPM while cutting for maximum control ; Adjustable pivot fence broadly supports work piece, such as crown molding lying flat, for improved stability while cutting ; Splinter guard reduces tear out and increases user safety ; Externally replaceable carbon brushes to greatly prolong the life of the tool ; Dust collector attachment minimizes airborne particles ; Compatible with the UU610 and UU610CZ Universal Work Stations ; Industry-leading 5-year warranty Includes:; 8-1/2" TCT Saw Blade ; Dust Bag ; Vice Assembly ; Box Wrench ; Sub Fence | |
| | Product Details | | Product Length: | 19.0 inches | | Product Width: | 23.0 inches | | Product Height: | 28.0 inches | | Product Weight: | 45.0 pounds | | Package Length: | 29.8 inches | | Package Width: | 16.2 inches | | Package Height: | 15.9 inches | | Package Weight: | 41.4 pounds | | Average Customer Rating: |  based on 5 reviews |
| |
| | Customer Reviews | Average Customer Review:
Write an online review and share your thoughts with other customers.
2 of 2 found the following review helpful:
 Looks cool, works OK, fence alignment terrible Jun 25, 2010
I've had the saw for a year now, and was initially very impressed with the fit, finish and function. Although I intended to use it primarily for building furniture, for the first few months I had to use it only for rough carpentry work, so things seemed OK.
Once I began using it for my woodworking a few months ago, it became clear that the fence had not been set accurately at 90 degrees to the blade - it was a bit off. I noticed this when checking for square with a good quality square, and confirmed it with the 5-cut method. That's when I found the following design issues:
a) Although the split fences have adjustment holes, the holes in the left fence are smaller than the ones in the right fence. This limits the maximum angle to which you can adjust the fence.
b) The base table of the saw was NOT calibrated to Zero degrees relative to the fence as claimed, hence the blade was not cutting square to the fence.
c) With angle set to Zero, the fence cannot be adjusted perpendicular to the blade (limited as explained in point a). Specifically, I get a full 1/8" difference with the 5-cut method, which means that the fence is 1/32" out of square even when angled to its limit.
d) The laser guide was not set accurately as claimed. It cannot be adjusted by simply following the instructions. There are actually 3 adjustment points, not just one as shown in the manual. One of these is hidden behind the Warning sticker.
After trying to figure all this out, I have come to the conclusion that the base table is off by about a 1/2-degree. I confirmed this by setting it to 1/2-degree right and successfully setting the fence perpendicular. Of course, this negates the benefit of the angle markings and the "thumb-actuated positive miter stops".
I called Hitachi Warranty support, and although they tried to be helpful, it was clear that they weren't quite knowledgeable about the saw. They referred me to a Warranty Service Center who were equally unhelpful.
Another minor thing - the electric brake works most of the time, but does skip every now and then Not a big deal, but I wish it would work as designed.
So this is probably a decent saw for rough work, but needs adjustments for anything accurate. Hence, for the price, it's not worth it.
1 of 1 found the following review helpful:
 4++ Stars May 27, 2010
I would have rated this saw at 4 1/2 stars if that option was available. I purchased the original model a long time ago(10+ years) when I was a GC and my crew used this saw every day and it never went in the shop as still runs today but it was showing its wear so I decided to buy a new saw. I looked at the 10" and 12" but decided to go back to a proven entity. The major difference is the addition of the laser and the light but it still has the dual rails which I think is the key for these tools to maintain its accuracy. I typically don't go for gimmicks for things like a laser as I would rather align my cuts by eye and the blade, but I find the laser very accurate and helpful when you need to make cuts that don't need to be super critical. The lamp is a nice feature but it is the reason that I knocked a few points off of my rating. I find it cumbersome as its stem is located adjacent to the trigger and it takes time to adjust your use of this tool around it but you certainly are able to get used to, but it certainly is not a deal breaker. Earlier this year my wife and I were installing new wood floor through out our house and she made at least 50% of the cuts and this was the first power saw of any type that she had ever used. This speaks for itself in regard to her feeling safe around this saw, ease of use, etc. I was able to buy it at a great price around $275 but it is certainly a bargain even at $50 more
 Nice design, bad product Dec 04, 2009
Bought this to upgrade from a conventional miter saw. Checked it out before using and found that the saw blade was misaligned with the turntable. It would have damaged the turntable inserts and blade if I had started using it. Don't know because I never used it, but it would probably would not have cut straight.
Called Hitachi customer service and got no help on service or exchange.
0 of 2 found the following review helpful:
 Great Miter Saw for the price May 28, 2009
I purchased this for my Dad for X-Mas and he loved it! The laser was a nice bonus that he didn't have from his previous model.
12 of 12 found the following review helpful:
Not Impressed Yet! May 08, 2009
After waiting for years to buy this saw because of all the great reviews I bought the one with the laser. I build furniture and thought this would be the end all of miter saws. First off, the fence was out of adjustment and took some doing to line up. After less than 3 months of limited usage, the electric brake quit braking! I took it to an authorized repair facility, they ordered a switch which came in defective. Then they ordered another switch, armature, and two other items and I got the saw back after about 4 weeks. Less than 10 hours of use and once again, no brake -- it just coasts down forever which really makes it totally inefficient. I'd just as soon use my table saw. I contacted Hitachi once again wanting them to send my a replacement but it won't work that way. I need to take it to another authorized repair place and have them go through whatever the proper channels are to replace this saw. Maybe since it's "new & improved" I should have gotten the older, proven one or maybe because it's made in a different factory. Whatever the case, I'm very disappointed with this saw up to now. Purchased the end of October and barely any use.
| |
| |
| |  | |  |
|
Best Sellers | You may also like ... |
